We are an authorized distributor for all VETO PRO PAC products.
VETO products are ONLY available for purchase in-store and cannot be sold on our website.
All product listings are for product catalog representation purposes only.
You can see our current VETO bags in our store location; Florida Tools Tampa Bay, located on 3120 W Kennedy Blvd Tampa FL 33609.
The WRENCHER-XL is an extra-large sized open top plumbing bag, which features four vertical storage zones for large pipe wrenches and channel locks. One or both of the included interior V-SWAP™ pocket panels (Tool Panel and Tank Panel) can be removed, creating additional space for bulky tools or large fittings. Additional panels may be purchased below. Included is a compact zippered pouch that can be removed, stuffed and magnetically secured into a rear pants pocket, over a belt, or proposed up and kept within hand’s-reach. All WRENCHER bags feature a water-repelling tarpaulin interior for easy clean up, and an injection molded waterproof base.
Description
The open top WRENCHER tool bags were designed based on professional insights to accommodate tools used by plumbers. Each bag has a water repelling tarpaulin interior and includes two V-SWAP™ panels (Tool Panel and Tank Panel) of vertical pockets to accommodate a variety of hand tools, equipment or bulk storage when removed. Additional panels may be purchased separately. These versatile bags offer multiple storage options in a rugged platform with an injection molded polypropylene waterproof base
Specification
PRODUCT SPECIFICATIONS:
- Height (H) : 17” (43 cm)
- Width (W): 17" (43cm)
- Depth: 13" (33 cm)
- Handle Height (HH): 23" (58cm)
- Weight (empty): 13lbs/6 kg
- Internal Volume: 2280in3/37L
- Max Payload: 80lbs/36kg
MAXIMIZED TOOL STORAGE CAPACITY:
- Easily cleaned tarpaulin interior repels water
- Leather carrying grips
- 17 available interior & exterior pockets
- Synthetic rubber bumper protects opening of bag during insertion of large tools
- 4 vertical storage shafts with stainless steel tool deflector partitions & padded floor for oversized wrenches
- V-SWAP™ removable tool pocket panel system provides expandible bulk storage capacity or up to 10 interior pockets for hand tools & a 14oz fuel cylinder
- Removable zippered pouch provides 7 additional secured pockets
- Waterproof Polypropylene plastic base for moisture and abrasion protection
OTHER FEATURES:
- Warranty: 5 Years (see Veto warranty terms and conditions)
Additional Information
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
