Overview
A highly effective water-based treatment for the removal of dirt, mould and algae from patios and block paving. Thompson's has formulated it to also prevent mould re-growth on the surface for 6 months. Ideal to remove dirt and grime to leave a brightened and revived surface on paving slabs, block paving, flagstones, concrete, tarmac, red bricks, tiles & terracotta.
- Kills mould and algae
- Portects against algae regrowth
- Easy to use
- Revives and cleans
Area | Exterior |
Recommended Use | Patio & paving slabs, block paving, flag stones, concrete, tarmac, red bricks, tiles & terracotta. |
Base | Water-based |
Coverage | 3-4m² per litre |
Drying Time | 30 minutes dependant on conditions |
Recommended Coats | 1 Coat or as required |
Application Method | Stiff bristle brush |
VOC Levels | Low |
Clean Up | Clean brushes, sprays or watering cans immediately after use with water. |
Preparation
Always ensure to remove any debris and dust and scrub with a stiff bristle brush.
Application
Always perform a test on a small inconspicuous area to ensure compatibility, and always follow the manufacturer's instructions found on the packaging.
- Pour the cleaner directly onto the surface.
- Give the area a scrub with a stiff bristled brush.
- Leave for 15 minutes and give the area another scrub.
- Hose down and wash off the suds.
- Leave to dry, if required repeat the process.
Aftercare & Storage
Maintain your patio and repeat this process after 6 months to stop mould and algae regrowth.
Store between 5 and 25°C. Keep in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight.