Overview
Dulux Trade Vinyl Matt Light Space reflects up to twice as much light around the room than conventional Vinyl Matt, so is particularly effective in smaller spaces and areas of low light. This extra light reflectance makes rooms feel more spacious. The coverage is excellent at up to 17m2 per litre and it's ready for a recoat in 2-4 hours.
- Reflects up to twice as much light than standard Vinyl Matt
- Revolutionary Lumitec technology
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Interior |
| Recommended Use | All normal interior walls & ceilings |
| Base | Water-Based |
| Coverage | Up to 17m2 per litre |
| Drying Time | Dependant on temperature and humidity |
| Re-Coat Time | 2-4 Hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush, Roller, Conventional Spray, Airless Spray |
| VOC Levels | Low |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Preparation
For best results, make sure that surfaces to be painted are sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and salts. Remove all loose and defective paint.
- Wash where necessary to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry.
- Surfaces that remain powdery after thorough preparation should be sealed with an appropriate .
- Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.
Note: Pre-1960s paint surfaces over wood and metal may contain harmful lead, so special precautions should be taken when painting these surfaces.
Application
Stir thoroughly before, we recommend to perform a test patch to ensure you are happy with the finished results.
- Stir thoroughly before use, do not apply in temperatures below 8°C
- Apply with a brush, roller, conventional spray or airless spray
- Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt Light Space (up to 1 part clean water to 5 parts paint)
- Normal finishing is 2 full coats of Dulux Trade Vinyl Matt Light Space, however on previously painted surfaces in good condition in similar colours, 1 coat may suffice
Brush and roller
- If thinning is required add up to 1 part clean water to 10 parts paint (not to be exceeded)
- Always start at the edges with a good quality brush and fill the remaining space using a roller
Conventional spray
- If thinning is required add up to 1 part clean water to 2.5 parts paint
Airless spray application
- If thinning is required add up to 1 part clean water to 5 parts paint
- A typical set up for airless spray application would be a minimum working pressure on paint of 133 bars (2000 lb/sq in) with a spray tip size of 0.38mm (15 thou) and a spray tip angle of 65°
Note: Always read and follow the manufacturer's instructions found on the tin
